¥148,262 JPY
| /
| Brand | J'S RACING |
| Series Name | AERO BONNET TYPE-V FRP |
| Product Number | ABV-K8-F |
| Compatible Car | HONDA CIVIC FK8 |
| Product Description | Material: CFRP / FRP Potential increase of Type R by weight reduction and cooling effect! Honda Civic Type R TC (manufactured by Honda Performance Development) 2020 TC America series officially adopted parts Civic TYPE -The aero bonnet for exclusive use of R FK8 finally appeared !!! -It is designed to increase the volume of the intake part in order to actively take in the intake air into the air cleaner. -The K20C engine, which boasts high output, and the V-shaped ducts and main ducts that provide heat generated from the turbine on the left and right generate negative pressure, enabling highly efficient waste heat. Due to the heat exhaust effect from the total duct area of about 150 cm2, the engine potential is brought out 100% by lowering not only the water temperature and oil temperature but also the intake air temperature. Suppresses the work. -In a comparison test with the genuine bonnet conducted at the Suzuka International Racing Course, the water temperature showed a maximum cooling effect of -15 ° C and an average of -10 ° C. also. It has been confirmed to be strong enough to withstand high speeds of 220km or more without a bonnet pin. * Test vehicle: Boost 1.8kgf / cm2 / 365ps specification ・ Temperature 30 °C ・ No rain protection ・ By reducing the weight of the genuine bonnet to 7.8kg, further cornering performance is demonstrated. Since it is compatible with genuine bonnet catch, it can be installed by bolt-on even without a bonnet pin! The cooling aero bonnet, which is indispensable for FK8, which has a big heat damage, is completed! * The image is carbon FRP. This product is made of FRP, so be sure to paint it. ● Weight 7.8kg (genuine 9.7kg) Civic Type R FK8 type only * Cannot be installed on FK7 and FC1. ● Front: Made of FRP Back: Made of FRP * Painting required ● Genuine bonnet catch compatible product (with metal fittings and bolts installed) ● Washer nozzle and hose are re-used using the attached clip. Please use it. |
| Remarks | Engine: * The image is made of carbon / FRP. This product is made of FRP, so be sure to paint it. * Please be sure to install it to prevent it from falling off while driving. * Please check the mounting condition regularly. * Although it is compatible with genuine bonnet catch, it is recommended to install a bonnet pin on vehicles such as when driving in sports in the high speed range. * The inner rain protect aluminum net of the center duct is sold separately. Please purchase from the options below. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
