¥142,085 JPY
| /
Brand | J'S RACING |
Series Name | AERO BONNET TYPE-V FRP |
Product Number | ABV-K7-F |
Compatible Car | HONDA CIVIC FK7 |
Product Description | Material: CFRP / FRP The high-performance aero bonnet developed for the Civic TYPE-R FK8 is finally available for the FK7!!! ・V-shaped ducts and main ducts installed on the left and right side of the heat generated by the L15B engine and turbine generate negative pressure, making it possible to exhaust heat with high efficiency. ・Due to the heat exhaust effect from the total area of the ducts, approximately 150cm2, the engine's potential is brought out to 100% by lowering not only water and oil temperatures, but also intake air temperature, correcting heat sag and high water temperature during sports driving such as on the street as well as on the circuit. Prevents the program from working. ・A single piece of carbon cloth is pasted together using skillful craftsmanship techniques to create a high-quality finish. - Compatible with the genuine bonnet catch, so it can be installed by bolting on! ・By reducing the weight of the original bonnet to 7.2kg from 9.5kg, it exhibits even better cornering performance. - Can be used for a wide range of purposes, from street to circuit use. *Separate genuine parts are required for installation* *Please be sure to prepare the following genuine parts before installation* 76879-TGH-A01 Tube (620MM) ×1 76830-TGG-E01 Joint Y, tube × 1 76877-TGH-A01 Tube (240MM) ×2 76810-TGH-A01 Nozzle ASSY., Front windshield washer x 2 76829-ST3-E01 Joint, rear watch tube x 1 90652-S2A-003 Clip, tube 7MM (black) ×3 91501-TLA-A01 Clip, tube 7MM (black) ×1 76838-SZA-A30 Clip, watch tube x 2 76878-TGH-A01 Tube (540MM) ×1 ●Weight 7.2kg (original 9.7kg) |
Remarks | *In order to prevent it from falling off while riding, please make sure to install it at a pro shop etc. *Please check the installation condition regularly. *Since it is FRP molded, fitting processing of the washer nozzle part is required. *The center duct's inner rain protection and aluminum net are sold separately. Please purchase from the options below. *Although it is compatible with the genuine bonnet catch, we recommend installing a bonnet pin for vehicles that are used for high-speed sports driving. *If you want to demonstrate further cooling performance on the circuit, a separate thermostat and coolant are required. |
Notes | Images are for illustration purpose only. Actual product may vary. |